PRESSURE CALIBRATORS |
T140
Pressure Calibrator Manometer
View PDF
file (120KB)
Request
Pricing Via Email
|
|
| COMMON
FEATURES |
 |
High Accuracy gauge or differential
capability |
|
Rugged, dust tight, water resistant
case |
|
Isolated SS sensors on 300 PSI and 3000
PSI units |
|
Easy to read Super-Twist LCD |
|
Intuitive controls make operation easy
even for infrequent users |
|
Powered by a common 9 volt battery |
|
The Tuff-Tools line of calibrators is
designed to give the technician laborato-ry grade accuracy in a family of rugged, easy to
use instruments.
The T140 Pressure Calibrator is available in several ranges (200" H2 O, 30 PSI, 100
PSI, 300 and 3000 PSI).
Operation of these calibrators is made easy through the use of a sealed membrane keypad
with simple controls. When combined with our MECP100 Hand Pump, the T140 Kit makes a great
package to handle your pneumatic calibration requirements.
Each unit includes: Carrying case, test leads, 9V battery, instruction manual, and NIST
Certificate. |
| General Specifications:
(Specify capability 30, 100, 300, 3000 PSI or
200" when ordering) |
| Ranges: |
–14.00 to 30.00
PSIG/PSID or
–14.0 to 100.0 PSIG/PSID or
–14.0 to 300.0 PSIG/PSID or
–14.0 to 3000 PSIG/PSID or
±200" H 2 O |
| Resolution: |
30 PS - I .001 PSI
100 PSI - .01 PSI
300 PSI - .01 PSI
3000 PSI - 0.1 PSI
200" - 0.01 inH 2 O |
Accuracy¹
30/100PSI: |
±0.05% F.S. ±1 LSD
–5 PSI to Full Scale |
| 300/3000PSI: |
±.05%of Reading ±2 LSD
Note: for vacuum accuracy is 0.1% of F.S. ±1 LSD |
| 200": |
±0.1% F.S. ±1 LSD |
| Operating Temp.: |
0 to 50°C |
| Storage Temp.: |
–20 to 60°C |
| Temp. Stability ² : |
0.01% F.S./°C |
| MAX Overpressure: |
2x |
| Ports: |
Two 1/8" FNPT |
| Media: |
30 PSI
100 PSI Non-corrosive Gas or Liquids
200" |
| Engineering Units: |
PSI, in H 2 O, cm H 2
O, mm
H 2 O, BAR, mm Hg, kPa and kg/cm² |
| Key Features: |
Zero, Min/Max, Clear,
Damp & Hold |
| Weight: |
14 oz. |
NOTE
1: 18°C to 28°C
NOTE 2: 0 to 18°C and 28°C to 50°C |
|
|
|
